2 CHANNEL E-STIM BALL CRUSHER

The 2 Channel E-Stim Ball Crusher has large copper electrodes to provide electrical contact to the top of the balls plus a Bi-Polar electrical crusher plate to make contact on the bottom. Use Banana Y Plug Adaptors for a variety of connection possibilities.

Specifications:

• One set of wing nuts to lock the balls firmly in place with the round copper electrodes
• Another set of wing nuts to tighten the crusher plate down against the balls
• No wire leads to break off or connections to come loose
• The power sockets are permanently mounted in the edge of the crusher plate
• Can be used with any Erostek, Folsom box, Tens unit, or other e-stim box that has "Banana Plug" leads

 CAUTION, USE AT YOUR OWN RISK! This device is made for use by consenting adults only. The manufacturer and seller of this device recommends that it not be used without training by a professional.

E-STIM ACRYLIC BALL PRESS

The E-Stim Acrylic Ball Crusher has the electrodes on the back plate and a clear front plate so you can watch the action. Insert the balls first, then the cock through the hole on the back plate, pull the cock only through the front plate, put on the adjustment knobs, and you're ready to go.

• The contact strips on the electrode plate are permanently bonded to the backing
• No wire leads to break off or connections to come loose
• The power sockets are conveniently mounted in the bottom edge of the back plate
• Can be used with any Erostek, Folsom box, Tens unit, or other e-stim box that has "Banana Plug" leads
• Large rubberized knobs for easy adjustment
• Dimensions: 5" x 7"

Sizing Information:

• Size A: 1-3/4" Hole in Back Plate, 1-1/2" Hole in Front Plate
• Size B: 2" Hole in Back Plate, 1-3/4" Hole in Front Plate
• Size C: 2-1/4" Hole in Back Plate, 1-3/4" Hole in Front Plate
• Sizing suggestion: The back plate hole should be the same diameter or the next larger as you would wear in a metal cock ring

CAUTION, USE AT YOUR OWN RISK! This device is made for use by consenting adults only. The manufacturer and seller of this device recommends that it not be used without training by a professional.

QUAD POLAR E-STIM BALL PRESS

The Quad Polar E-Stim Acrylic Ball Crusher has a bipolar contact board on the back plate and stainless bipolar contacts on clear front plate so you can watch the action while still having an intense e-stim experience. Insert the balls first, then the cock through the hole on the back plate, pull the cock only through the front plate, put on the adjustment knobs, and begin to apply pressure.

Connect one channel from your e-stim box to the back plate and the other channel to the two contacts on the front plate and you've got e-stim going across the top of the balls and the bottom of the balls. OR, use Banana Y Plug Adaptors to split the leads from both channels between the top and bottom plates and you've got MAX e-stim going all the way through the balls.

• The contact strips on the electrode plate are permanently bonded to the backing
• The stainless contacts on the top plate are partially recessed into the plate to keep them aligned properly. Banana jacks plug directly into the mounting studs
• No wire leads to break off or connections to come loose
• The power sockets are conveniently mounted in the bottom edge of the back plate
• Can be used with any Erostek, Folsom box, Tens unit, or other e-stim box that has "Banana Plug" leads
• Large rubberized knobs for easy adjustment
• Dimensions: 5" x 7"

Sizing Information:

• Size A: 1-3/4" Hole in Back Plate, 1-1/2" Hole in Front Plate
• Size B: 2" Hole in Back Plate, 1-3/4" Hole in Front Plate
• Size C: 2-1/4" Hole in Back Plate, 1-3/4" Hole in Front Plate
• Sizing suggestion: The back plate hole should be the same diameter or the next larger as you would wear in a metal cock ring

CAUTION, USE AT YOUR OWN RISK! This device is made for use by consenting adults only. The manufacturer and seller of this device recommends that it not be used without training by a professional.

BANANA PLUG Y ADAPTOR

Allows one banana plug to power two electrode surfaces (instead of one). Ideal for converting a bipolar electrode toy into a single pole device, or increasing the surface area when paired with a larger electrode.

BIPOLAR E-STIM PLATE

The BiPolar E-Stim Ball Crusher Plate has alternating positive and negative contact strips. Add the BiPolar E-Stim Plate to your Acrylic Ball Crusher to upgrade it to E-Stim functionality.

Specifications:

• No wire leads to break off or connections to come loose
• The power sockets are permanently mounted in the edge of the crusher plate
• Can be used with any Erostek, Folsom box, Tens unit, or other e-stim box that has "Banana Plug" leads

CAUTION, USE AT YOUR OWN RISK! This device is made for use by consenting adults only. The manufacturer and seller of this device recommends that it not be used without training by a professional.